Skip to product information
  • Nature Funda cubre plantas polar anti-heladas verde 70 g/m² 2x2,5 m

NATURE FUNDA COVER GREEN ANTI-LEATED POOR PLANTS 70 G/M² 2x2.5 m

$49.73
$49.73 $55.97
You save 11% ($6.24)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Nature winter polar case will protect your plants during the winter. It is made of non -tissue polypropylene resistant to UV rays. This cover has a density of 70 g/m² and the dimensions are 2 x 2.5 m. At the bottom of the case, there is a tightening cord with an autobloqueo system and a zipper closure on the side. This cover covers anti-helled plants is light and permeable to water and air, so it lets the light pass. It is also easy to cut and does not require maintenance during winter. There are 4 important functions of the winter polar lining: 1) Protection of plants against the cold through the use of 5 to 6 layers. Reduces freezing temperatures in a few degrees per layer. 2) Protection of outbreaks in early spring. 3) Protection of seedlings and plants against parasites and bird attacks. 4) Crop protection. Nature advises to use the covers from October to April and not water the plants frequently.

  • Color: Green
  • Material: Polar lining
  • Dimensions: 2 x 2.5 m (width x long)
  • Density: 70 g/m²
  • It does not require maintenance during winter.
  • It can be easily tightened thanks to the zip closure
  • Material: Polypropylene: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.