Skip to product information
  • Noordwand Papel pintado Leopard Print negro Noordwand
  • Noordwand Papel pintado Leopard Print negro Noordwand

Noordwand Lepapard Print Wall paper

$41.81
$41.81
Tax included. Shipping calculated at checkout.

Description

This Leopard Print wall paper, with a natural appearance, fits perfectly in the Noordwand FX collection. These are monocolor wall papers, simple at the same time as beautiful. This non -woven wallpaper has an upper vinyl layer with the back of paper and a series of undeniable advantages thanks to its multicapa structure. The tail should be applied to the wallpaper, not directly on the wall. The material is strong, easy to apply and easy to clean. This wallpaper is a wall paper with a camouflage -looking, with a beautiful leopard print in soft colors and motifs, which gives your home modern.

  • Color: Black and White
  • Material: non -woven fabric with upper vinyl
  • Dimensions: 0.53 x 10 m (width x long)
  • 53 cm printed pattern
  • Advantages:
  • Hides irregularities on the wall
  • Easy to clean, splashproof
  • It can be painted
  • Impact resistant
  • Note:
  • Vinyl wallpaper is porous and is not easy to remove
  • General:
  • Please check the glue application instructions on the label
  • It is removed with an elimination or steam agent for wallpaper

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.