Skip to product information
  • Noordwand Papel de pared Fabulous World Dots blanco y negro

Noordwand Fabulous World Dots White and Black Wall Paper

$39.26
$39.26 $44.18
You save 11% ($4.92)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Fabulous World Dots non -woven paper of the Noordwand brand has a sophisticated black and white colors. The non -woven wallpaper has several advantages over traditional wallpaper, the most important of which is that the glue is applied only to the wall and not to the wallpaper itself. This means that you can easily cover the wall with tail and avoid the discomfort of using a glued table. Another advantage is that the paper does not need to soak up and, therefore, it will not expand or shrink after the application, which facilitates the placement of the wallpaper strips and the correct monitoring of the pattern. As easy as applying non -woven wallpaper is to remove it, since it easily detaches itself from one piece. Keep in mind that this wallpaper is permeable in the air and moisture, so it cannot be washed. To prepare it, we advise you to follow the instructions included and make sure that the surface of the wall is clean, dry, intact and has a uniform color. You have to wash any stain and slightly sand the entire surface.

  • Color: Black and Black
  • Material: non -woven fabric
  • Dimensions: 10 x 0.53 m (long x width)
  • Pattern repetition: 9 cm (straight coincidence)
  • Easy to apply, the glue is applied only to the wall
  • Easy to remove

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.