Skip to product information
  • Vetonek Paneles de pared 12 uds cuero sintético crema 30x30 cm 1,08 m²

Paneles de pared 12 uds cuero sintético crema 30x30 cm 1,08 m²

$43.50
$43.50 $48.95
You save 11% ($5.45)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¿Estás cansado de mirar aquella pared vacía y aburrida? Pues ¡estos modernos paneles de pared son justo lo que buscas para convertir una pared vacía en un elemento decorativo único! Material duradero: El cuero sintético de primera calidad es un material muy duradero. Es resistente a las manchas, por lo que es fácil de limpiar con un paño húmedo. Además, la superficie lisa da un aspecto lujoso y la belleza del cuero auténtico.Aislamiento del ruido y del calor: El acolchado de espuma de estos adornos de pared garantiza el aislamiento térmico y mejora la acústica de la habitación al reducir el ruido.Amplios usos: Estos revestimientos de pared son aptos para el dormitorio, el salón o la sala de estudio. ¡Son un aporte perfecto para el interior de la casa, y crean una impresión duradera!Diseño de bricolaje: Puedes combinar estos paneles de pared acústicos libremente según el tamaño de la pared. Nota:Cada producto viene con un manual de montaje en la caja para facilitar el montaje.

  • Color: Crema
  • Material: Cuero sintético (75% cloruro de polivinilo, 5% algodón, 20% poliéster), MDF, espuma
  • Dimensiones: 30 x 30 cm (largo x ancho)
  • Grosor: 1,8 cm
  • Superficie total cubierta: 1,08 m²
  • Diseño de decoración de botones
  • La entrega incluye:
  • 12 x Panel de pared

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.