Patas para mesa de comedor en forma de V 3 uds antracita acero

$151.00
$151.00 $169.94
You save 11% ($18.94)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Estas patas para mesa de comedor combinan forma y función. Son una opción ideal para personalizar tu mesa de centro. Material duradero: esta pata de mesa de comedor está hecha de acero con recubrimiento en polvo, lo que la hace resistente y duradera.Diseño práctico: esta pata de mesa de comedor incluye niveladores de pie ajustables, lo que garantiza la estabilidad incluso en suelos irregulares y minimiza los arañazos en el suelo. Además, el soporte cuenta con orificios pretaladrados y tornillos incluidos en la entrega, que se pueden utilizar para fijar la pata al tablero de la mesa (no incluidos), lo que facilita el montaje.Estética moderna: La pata de la mesa ofrece un aspecto elegante y contemporáneo. Sus líneas limpias y su diseño geométrico realzan el aspecto general del mueble. Información útil:La entrega solo contiene las patas de la mesa, el tablero no está incluido.

  • Color: Gris antracita
  • Material: Acero con recubrimiento en polvo
  • Tamaño total: 70 x (72-73,3)) cm (ancho x alto)
  • Dimensiones del tubo: 80 x 40 x 1 mm (largo x ancho x alto)
  • Dimensiones del soporte: 540 x 80 x 4 mm (largo x ancho x alto)
  • Con niveladores de plástico ajustables
  • Uso recomendado: mesa de comedor o escritorio
  • La entrega contiene:
  • 3 x Pata de mesa de comedor
  • Tornillos (M5x18mm) para fijación de patas con tablero de mesa

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.