Skip to product information
  • Vetonek Kit de estudio fotográfico con set de luces, fondo y reflector

Photographic study kit with lights, background and reflector

$342.72
$342.72 $385.73
You save 11% ($43.01)
Tax included. Shipping calculated at checkout.

Description

This photographic study kit is an ideal option to photograph in the study or outdoors. Excellent performance: softboxes provide a soft light, which avoids hard shadows. Thanks to the cold light source, no heat occurs in the study. It is a continuous lighting and not a set of flashes. Flexible background system: the flexible background system is easy to configure and can be combined with the background that has no seams and does not fall. Each support has a standard 1/4 inch thread, suitable for analog and digital cameras. Useful reflector games: Each reflector comes with different surface panels. You can work with different combinations for warmer or faster lights in order to photograph interiors and exterior. Fácil Storage: Thanks to the transport bag included, the kit is easy to store and transport.

  • Lighting kit:
  • Lamps:
  • Power: 23 watts per lamp (LED bulb)
  • Effective power is equal to 100 w
  • Color temperature: 5600 Kelvin
  • Umbrella Support: Yes
  • Bulb cap (E27)
  • 220 V-50/60 Hz
  • Cable length: 2.9 m
  • Tripodes:
  • Height: 78 - 210 cm
  • Material: Black
  • Color: black
  • Softbox dimensions: 40 x 40 cm (long x width)
  • Background kits:
  • Color: black
  • Material: Black
  • Support height: 75-210 cm (adjustable)
  • Crossbar width (among the supports): 155-300 cm (adjustable)
  • Dimensions of the transport bag: 85 x 15 x 15 cm (length x width x high)
  • Background:
  • Color: black
  • Dimensions: 600 x 300 cm (long x width)
  • Material: 100% cotton
  • Do not fade
  • Reflector:
  • Color: gold, silver, soft light, white, black
  • Material: polyester, steel
  • Reflector diameter 5 in 1: 110 cm
  • Reflector dimensions 2 in 1: 1.5 x 1 m (width x high)
    • Delivery contains:
  • 3 x photographic lamps
  • 3 x softbox
  • 3 x tripods
  • 2 x supports
  • 2 x transverse bar segments
  • 1 x background
  • 1 x reflector 5 in 1
  • 1 x reflector 2 in 1
  • 2 x transport bags
This device is not intended to be used by people (including children) with reduced physical, sensory or mental abilities or lacking experience and knowledge, unless they are supervised or have received instructions on the use of the apparatus by a person responsible person of your safety. This product is not a toy. Do not allow children to play with the device.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.