Pisa Citanies for Cortation with 100 cm adapter

$270.05
$270.05
Tax included. Shipping calculated at checkout.

Description

Remove snow is a simple job with our tractor quitthar! It is perfect to clear sidewalks, trails and car accesses without having to get up from your tractor's seat. The Quitanieves sheet has a cleaning width of 100 cm. It is made of steel resistant with powder coating, with a large load capacity and can even with the snow more difficult. The replaceable rubber strip is perfectly grabbed to the surfaces without damaging them. The assembly tube can be adjusted at 3 angles, so it is easy to use. The extension handle is designed to easily adjust from the driver's seat. The return of the sheet by docks protects the shovel and the tractor. Thanks to the fast change system, you can get up or decoupling the shower easily. An adapter is included to set up this shield in the corteped.

  • Color: Silver
  • Material: powder coating steel, rubber
  • QUITANIEVES PAL:
  • Palad dimensions: 100 x 44 cm (long x width)
  • Leaf thickness: 2 mm
  • Rubber blade thickness: 4 mm
  • 3 angles adjustment
  • Mango length: 100 cm
  • It can be mounted on the corteped
  • Adapter:
  • Dimensions: 401 x 220 x 120 mm (length x width x high)
  • Interior dimensions of the tube: 40 x 40 mm (length x wide)
  • Thickness: 2 mm
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.