Skip to product information
  • Vetonek Placa de vidrio para chimenea rectangular 120x50 cm

Glass plate for rectangular fireplace 120x50 cm

$76.80
$76.80 $86.45
You save 11% ($9.65)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This chimney glass plate can be used as a soil lining to protect the surface of a floor when the fire is on. First quality material: made of tempered glass, this glass panel has excellent resistance to high temperatures. In addition, the glass motherboard supports up to 250 kg. Pulido Beveled Borde: The glass panel with an 8 mm facet cut has a beautiful liquid transition to the ground with sanded and polished edges. The visual effect of the soil is maintained by the transparency of the faceted glass. Use Fácil: In just a few minutes you can easily place the chimney floor plate in your home to protect the parquet or the laminate of damages, dirt and burns in a way reliable Note: The temperature must be less than 200 ℃ when it is in use. Maintain a safe distance of at least 10 cm from the heat source.

  • Color: transparent
  • Material: Tempered glass
  • Dimensions: 120 x 50 cm (length x wide)
  • Thickness: 8 mm
  • Round edge
  • Required assembly: no

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.