Skip to product information
  • Vetonek Mesa consola madera maciza reciclada 120x35x76 cm

RECYCLED WOODED WOOD CONCEPT 120X35X76 CM

$141.27
$141.27 $158.99
You save 11% ($17.72)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This wooden console table is elegant as it is practiced. It can be used as a dining table and also as an office desk. The refined design will make this auxiliary table the strong point of any room. This decorative table is made of solid solid wood and steel with powder coating, so it is quite robust and lasting. Recycled wooden furniture has characteristics of different woods, such as teak, mango or acacia wood. Wood thus reused retains the characteristics of each of those types. That recycled wood is already aged, worn and dry, so it does not shrink or bend. Each step of the manufacturing process of this center table is carried out with the greatest care, both polishing and painting or varnishing. The crafts and the attractive veins of the wood give each piece of a unique character that differentiates it from the rest. The assembly is simple. Important note: The veins of the wood and the colors can vary from one piece to another, which makes each of our console tables unique; The delivery is random.

  • Material: recycled wood and steel structure with powder coating
  • Dimensions: 120 x 35 x 76 cm (length x width x high)
  • Hand -made
  • Sanding, painted and varnished

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.