Skip to product information
  • RedFire Brasero tipo barril Milshire acero negro

REDFIRE BRAZERO BRAIL TYPE MILSHIRE BLACK STEEL

$161.72
$161.72 $182.02
You save 11% ($20.30)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Redfire barrel type brazier, Milshire model, is designed with an elegant appearance and is a perfect choice to provide warmth and atmosphere to the outdoor space of your home. The brazier has firewood storage. It is a remarkable and multi -causted product, made of steel with a hard heat -resistant black dust coating. Therefore, it looks elegant and authentic. Combine in your beautiful garden perfectly. Under you can easily save wood and prepare a wood barbecue on storage. The wood compartment measures 45 cm wide, which offers ample space for your trunks. You can cook diverse and tasty dishes for everyone in your garden while enjoying the heat of the fire.

  • Color: black
  • Material: Steel
  • Dimensions: 45 x 49 cm (High diameter)
  • Black heat -resistant powder coating finish
  • Basero y Barbaccoa Barril type combined
  • Easy assembly
  • Delivery includes:
  • 1 x chrome cooked grid
WARNING! Probable danger of death and risk of injuries! Use in closed spaces can be dangerous and prohibited. Read the manual before using the product. Note: Important! Carefully remove the packaging before using the product, but keep the security manual. These are part of the product. Take into account all the security warnings mentioned in this manual. Read the instructions in its entirety and keep them for future references. These must be stored together with the product. This product is for domestic use and cannot be used for commercial or contractual purposes.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.