Skip to product information
  • RedFire Chimenea de jardín Fuego pequeña negra

Redfire Garden Black Garden Chimney

$150.03
$150.03 $168.86
You save 11% ($18.83)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This little Redfire Fuego Garden Chimney is made of durable and dust -covered steel with high temperature -resistant matte paint, which makes it lasting and resistant. It presents a practical and compact design and is easy to move and install in its place. With its matte black finish, it is a beautiful complement to any garden, terrace or balcony. The Fuego model brazier is easy to assemble with the tool included in just a few minutes. Set the fireplace in the fire area and simply ride the three legs below. In this way, you can enjoy the heat in a short time. Heat resistant fireplace perfectly eliminates smoke and gives it a modern touch. To enjoy the chimney for a long time, clean the frame, lid and the lower plate the next day or after it cools to avoid damage. The type of storage can also affect durability, since the more the material is exposed to the weather, before it can oxidize and show other signs of wear.

  • Color: matt black
  • Material: Steel
  • Dimensions: 30 x 115 cm (high diameter)
  • Steel sheet thickness: 1 mm
  • Practical and compact design
  • Heat resistant black powder coating
  • High chimney for optimal fume extraction
  • Easy to ride
  • Durable steel
  • Easy to clean
  • Weight: 13 kg
  • Delivery includes the assembly tool

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.