Redfire Chimney Salamanca Dark Red 36x36x85 cm clay

$221.20
$221.20 $248.97
You save 11% ($27.77)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Redfire's elegant Mexican chimney will be the center of attention of your garden or patio. This fireplace has a wide opening, so that it has enough space to turn on a solid fire. Made of clay, it is very durable. This brazier conducts heat in all directions so heat outlet is very effective. In addition, the metal base guarantees its great stability to be able to enjoy the fire safely.

  • Color: Dark red mottled
  • Material: clay
  • Dimensions: 36 x 36 x 85 cm
  • Perfect heat conduction
  • With great combustion opening
  • Equipped with a steel structure
  • You do not need maintenance
Important: carefully remove the packaging before using the product, but keep the safety instructions. These instructions are part of the product. Take into account all security warnings included in these instructions. Read these instructions in its entirety and keep them for future consultations. These instructions should be saved together with the product. This product is only for domestic use and should not be used for commercial or contractual purposes. Warnings: Caution! • This product is designed only for outdoor use. Do not use it indoors. • Warning: Always keep children and pets away from the product when in use. • Never leave a fire on without supervision. • Danger of carbon monoxide poisoning: Never turn on this product or let it burn or cool in small spaces. • Do not use this product in a tent, caravan, car, basement, devon or on a ship. • Do not use it under awnings, umbrellas or centers. • Fire danger: Hot embers can leave during use. • Warning: Do not use gasoline, waterfall, fluid for lighters, alcohol or other similar chemicals to turn on or turn on the device. • Use only lighters complying with the standard in: 1860-3. • This product is only suitable for unscrupted wood, trunks or redfire heatblox and coal for cooking. • Do not use coal in this product. • Do not use this product on platforms or any other flammable surface, such as dry grass, wood chips, leaves or decorative bark. • Make sure the product is placed at least 2 m away from flammable elements. Also make sure there is a minimum free space of 2 m from the upper part of the unit. • Do not use this product as an oven; Use it only as a patio heater. • Attention: This product will heat up a lot, do not move during operation. • Always use the safety tool provided and heat resistant gloves to open the door when it is in use, since the door will be hot. • When cooking on your grill, make sure the food is completely cooked before consuming them.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.