Skip to product information
  • RIDDER Gancho para toallas cromado 12110200

RIDDER HOOK FOR CHROME TOALLAS 12110200

$23.41
$23.41 $26.35
You save 11% ($2.94)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Are you looking for a hook to hang the bathrobe or towel? Doesn't you want to spoil the walls with screw holes or adhesive glue? Then the hook with Ridder's suction cup is the ideal solution! The unique suction system is easy to fix and loosen again turning 90 °. The suction cup offers grip strength in all types of tiles. If you use the adhesive pads supplied, they can be used even with background wallpaper and different types of plaster as a base. The suction cup is made of soft plastic and easy to clean and leaves no marks when removing it. The suction cup cover is made of hard plastic. Thanks to the crawling tongue in the suction cup, the disassembly will be a children's game. The adhesive pads supplied are also very useful in the event that the tiles are too rough or have fine (invisible) cracks. For perfect hygiene, we recommend that you remove the hook every 4 weeks, clean the surface well, rinse the suction cup with clean water and dry everything without fluff before renouncing it.

  • Color: Chromed
  • Material: stainless steel
  • Dimensions: 6.5 x 7 cm (diameter x length)
  • Ventosa diameter: 6 cm
  • It is fixed with sucker, no drilling or glue is needed

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.