Skip to product information
  • RIDDER Silla de baño blanca 150 kg A00602101

RIDDER White bathroom 150 kg a00602101

$143.29
$143.29 $161.27
You save 11% ($17.98)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Keep using the bathtub or shower independently with this rejustable bathing chair in Ridder. The chair has an oxidation resistant aluminum structure and a maximum load capacity of 150 kg. The seat and support of ergonomic design and generous size are made of easy plastic and are equipped with drainage holes and comfortable handles. The large non -slip legs of the chair ensure that it remains in place even in humid or wet soils. Security note: Make sure the legs fit audibably in place and are at the same height before using the bath stool.

  • Color: White
  • Material: Aluminum, PE, TPE (Thermoplastic elastomers)
  • Dimensions: 49 x 29.5 x 67-85 cm (wide x high x high)
  • Seat dimensions: 49 x 29.5 cm
  • Height adjustable seat: from approx. 34 - 52cm
  • Non -slip seat
  • Backup dimensions: 39 x 23 cm
  • Maximum load capacity: 150 kg
  • Drainage holes for a quick drying of the seat surface.
  • Ergonomic and easy -to -clean seat and support
  • Material: polyethylene: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.