Schütte Fig Mixer Mix with Waterfall Idrovia Chromium

$140.96
$140.96
Tax included. Shipping calculated at checkout.

Description

A good bathtub faucet is fundamental in every bathroom. From washing your hands until you have a shower, Idrovia Premium bathroom mixer with Schütte's chrome finish is the perfect choice. Each bathing tap includes a little noisy and replaceable ceramic disc cartridge. In addition, the construction of solid brass makes this tap very durable.

  • Color: Chromed
  • Material: brass
  • Dimensions: 18 x 24.5 x 8.6 cm (wide x high x high)
  • Bathroom mixer with ceramic record cartridge
  • Shower flexo connection diameter: ½ "(Ø approx. 1.9 cm)
  • 35 mm replaceable and silent cartridge
  • Metal side handle
  • Waterfall
Security notes. Let the installation work only make experts. . Caution damage caused by water! Before installation, close the general water supply. . Make sure all meetings fit correctly. . These taps are not suitable for use in low pressure electrical heaters and small accumulators. . We recommend the installation of a filter in the device or at least the use of angular valves with filter, to avoid the entry of foreign bodies that could damage the cartridge. . This tap is intended only for use in private homes! Only suitable for use in rooms with a temperature greater than 0 ° C. In case of frost danger, close the water supply and empty the tap. · Be careful when adjusting hot water. Danger of burns! . Incorrectly installed accessories can cause water damage! . Make sure the connection tubes do not come into contact with caustic or corrosive products, such as detergents or domestic cleaning products, since they can cause water damage. Despite careful production, sharp edges can be formed. Be careful! Elimination Its sink tap is delivered in a solid packaging to protect it from damage during transport. The packaging is composed of recyclable materials. Eliminate it in an environmental way. Do not throw the product to normal domestic garbage at the end of its useful life, but ask your municipal administration about the possibility of environmentally respectful elimination. Technical data. Flow pressure: Recommended 1.5 bar; Install a pressure reducer to more than 6 bar. Water temperature: max. 80 ℃ A installation instructions. Screw the connection tubes only by hand, do not use pliers or a key. After installing the tap, unscrew the mixer's nozzle, rinse the pipe and tap for a long time to eliminate dirt and waste. . Do not twist or tense pipes! In the first use, check the tightness of the connections! . Carefully check all connections after the first use to make sure they are well tight. . We do not assume any guarantee for an incorrect installation, particularly for subsequent damage. Care instructions Health taps require special care. Therefore, take into account the following instructions: · Chrome surfaces are sensitive to lime -solvent agents, acidic cleaning agents and all kinds of abrasives. . Never clean colored surfaces with abrasive, corrosive or alcoholic agents. . Clean the taps only with clean water and a soft cloth or a suede. . Make sure not between detergent in the cartridge housing, since this can cause the lever to get rigid and cause noises. Do not forget to unscrew the mixer nozzle at regular intervals and eliminate possible calcareous waste or foreign bodies. It is advisable to replace the mixing nozzle with a new one in case of extreme dirt. Maintenance . Keep in mind that a cartridge is a disposable piece and that it may be necessary to replace it every 1 or 2 years if the water has high levels of lime or dirt. You will find illustrated instructions on how to replace the cartridge on our website in the following link: web.fjschuette.de/austousch_kartusche-ventiloberteil.pdf. Periodically check all joints and connections to detect visible leaks or damage. . In case of leaks or visible damage in the accessories or connection hoses, these must be immediately reviewed by a specialist and replaced if necessary. Commissioning out of service. Cort the water supply before dismantling the product. . Pay attention to wastewater outlet. . Remove the product in the reverse order of assembly instructions. 1 Illustrations should be considered as fictional representations. There are product deviations. Subject to technical modifications. Franz Joseph Schütte GmbH Guarantee Card assumes a manufacturer's guarantee for accessories that you have bought according to the guarantee conditions of our website. Their guarantee rights derived from the purchase contract with the seller, as well as their legal rights are not limited by this guarantee. You will find our guarantee conditions on our website on the following link: Web.fjschuette.de/Garantie/GarantiebeDungungen.pdf

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.