Skip to product information
  • SCHÜTTE Barra de ducha fija METZ cromado SCHÜTTE
  • SCHÜTTE Barra de ducha fija METZ cromado SCHÜTTE

Schütte Fixed shower bar chrome

$139.03
$139.03
Tax included. Shipping calculated at checkout.

Description

Assemble this Schütte Metz fixed shower bar with a fixed shower and transform your bathroom into an oasis of well -being! The shower bar is made of metal with chrome finish. With an adjustable height of 78 to 115 cm, this thin shower arm adapts to almost all bathrooms. The shower bar has a deviation to easily change between fixed shower and hand shower so you can enjoy a relaxing shower at any time.

  • Color: Chromed
  • Material: brass
  • Dimensions: 38 x 3 x 78-116 cm (length x width x high)
  • Fixed shower shower bar
  • Adjustable height
  • ½ "(diameter approx. 1.9 cm) connection
  • With diverter to change between fixed shower and cadeducha
  • Wall bar
Security notes. Let the installation work be carried out only experts. . Caution damage caused by water! Before installation, close the general water supply. . Make sure all meetings fit correctly. . These taps are not suitable for use in low pressure electrical heaters or small accumulators. . We recommend the installation of a filter in the device or at least the use of angular valves with filter, to avoid the entry of foreign bodies that could damage the cartridge. . This tap is intended only for use in private homes! Only suitable for use in rooms with a temperature greater than 0 ° C. If there is a danger of frost, close the water supply and empty the tap. . Be careful when adjusting hot water. Danger of burns! . Incorrectly installed accessories can cause water damage! . Make sure that no caustic or corrosive product such as detergents or domestic cleaning products between in contact with the connection hoses; This can cause water damage. Despite careful production, sharp edges may occur. Be careful! The sink tap is delivered in a solid packaging to protect it against damage during transport. The packaging is composed of recyclable materials. Discharge it respectfully with the environment. Do not throw the product at normal domestic garbage at the end of its useful life, but ask your municipal administration about the possibility of environmentally respectful elimination. Technical data. Flow pressure: Recommended between 1.5 and 6 bars; In case of connection pressure greater than 6 bars, we recommend installing a pressure reducer. Water temperature: max. 80 ℃ Installation instructions. Screw the connection tubes only by hand, do not use pliers or a key. After installing the tap, unscrew the mixture nozzle, rinse the pipe and tap for a long time, to eliminate pollution and waste. . Do not twist or tense pipes! When using for the first time, check the tightness of the connections! . Carefully check all connections after the first use to make sure they are stable. . We do not assume any guarantee for an incorrect installation, particularly for subsequent damage.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.