Schütte toilet with soft natural closure bamboo

$80.78
$80.78 $90.92
You save 11% ($10.14)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Schütte's Bamboo Natural Váter cover offers a very comfortable experience in cleaning. It is also suitable for all toilets in general. This toilet seat, manufactured in bamboo fiber, is resistant to breakage, scratches and enjoy a long shelf life. With the soft closing function, you can close it without any embarrassing noise. You can easily clean it without much effort thanks to its fine surface. Delivery includes all assembly materials so you can install it easily.

  • Color: natural
  • Material: bamboo
  • Dimensions: 43.5 x 37.5 x 5.3 cm (length x width x high)
  • Resistant to breakage and scratches
  • Silent closure thanks to the soft closing mechanism
  • Moisture
  • Easy cleaning due to fine surface
  • Assembly materials included
  • Suitable for all conventional Váter cups
  • Easy to ride
Security notes. Do not climb or feel on the lid. Caution! Close the toilet lid by pressing it slightly. Excessive pressure will damage the automatic descent mechanism. We recommend reviewing butterfly nuts periodically and tighten them when necessary. Care instructions to prevent the surface from scratching, clean only with a little soapy water and a soft sponge and dry with a soft cloth. ATTENTION! Do not use abrasive substances, caustic cleaning agents, disinfectants or aerosols with aggressive additives. Use chemical and cosmetics carefully, some can damage the surface of your toilet seat. Elimination Its toilet seat is delivered in a solid packaging, to protect it from damage during transport. The packaging is composed of recyclable materials. Eliminate it in an environmental way. Do not throw the product to normal domestic garbage at the end of its useful life, but ask your municipal administration about the possibility of environmentally respectful elimination. 1 Illustrations should be considered as figurative representations, there may be deviations from the product. Subject to technical modifications.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.