Skip to product information
  • Vetonek Set de bar 3 piezas madera maciza de pino

Set de bar 3 piezas madera maciza de pino

$252.07
$252.07 $283.70
You save 11% ($31.63)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Toma un sorbo de tu vino favorito o disfruta de una buena comida con tu familia y tus amigos alrededor de este hermoso juego de bar de madera! Madera maciza de pino: Este juego de mesa y taburetes altos está hecho de madera maciza de pino. La madera maciza de pino es un bonito material natural. La madera de pino tiene vetas rectas, y los nudos dan al material su distintivo aspecto rústico.Asiento cómodo: La silla de bar está diseñada con un respaldo y un reposapiés integrado para ofrecerte un asiento cómodo.Superficie resistente: La mesa de bar tiene una superficie resistente, perfecta para colocar bebidas, comida y artículos decorativos.Amplios usos: La mesa y las sillas de bar tienen un diseño minimalista que se adapta a cualquier ambiente de tu casa. Se puede utilizar en la cocina, el comedor, el salón, etc.

  • Material: Madera maciza de pino con acabado encerado de miel
  • Dimensiones de la mesa de bar: 112 x 57 x 101 cm (largo x ancho x alto)
  • Dimensiones de la silla de bar: 37 x 38,5 x 107 cm (ancho x profundo x alto)
  • Capacidad máx. de carga (por asiento): 110 kg
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Mesa alta
  • 2 x Taburetes altos
Máximo 110 kg por asiento.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.