Skip to product information
  • Vetonek Set de muebles de jardín 4 piezas bambú y cojines blanco crema

4 pieces bamboo garden furniture and white cushions

$604.00
$604.00 $679.79
You save 11% ($75.79)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Create a relaxing rest area with this bamboo garden furniture game. This garden furniture set is made of bamboo, so it is robust and easy to clean. The thick and padded cushions provide a comfort plus to your leisure time. The cushions of the cushions have zippers to remove and wash them. With a light construction, this exterior furniture game is easy to move. Thanks to the modular design, you can place the set in the arrangement you want. Note: To prolong the useful life of outdoor furniture, we recommend that you clean them regularly and not leave them outdoors unnecessarily. Clean: Use a smoothly taging solution: If possible, keep the product in a place fresh and dry inside. If the product is stored outdoors, protégelo with a waterproof case. Clean and dry the excess water or snow of flat surfaces after a rain or snowfall. Allows ventilation to avoid moisture -related damage.

  • Cushion color: cream white
  • Material: bamboo
  • Cushion material: fabric (100% polyester)
  • Seat cushion thickness: 5 cm
  • Backup cushion thickness: 10 cm
  • Central sofa:
  • Dimensions: 65 x 70 x 60 cm (wide x high x high)
  • Seat depth: 65 cm
  • Seat height from the floor: 30 cm
  • Corner sofa:
  • Dimensions: 70 x 70 x 60 cm (wide x high x high)
  • Seat depth: 65 cm
  • Seat depth: 65 cm
  • Seat height from the floor: 30 cm
  • Requires assembly: Yes
  • Delivery includes:
  • 2 x corner sofas
  • 2 x central sofas
  • 4 x seat cushions
  • 6 x support cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.