Set furniture bar garden 7 pieces and gray synthetic rattan cushions

$770.78
$770.78 $867.50
You save 11% ($96.72)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Ratán garden furniture game has an elegant design and will become the center of attention of your garden, terrace or patio. The steel structure with powder coating and aluminum legs provide strength and resistance to tables and chairs, and thanks to their light construction, all furniture is easy to move. Thanks to Ratán Pe impermeable and weatherproof, the dining set is easy to clean. The table is made of solid acacia wood, a tropical tough wood, which is also outdoors and lasting. The thick soft cushions and foam stuffed, are very comfortable and are made of waterproof polyester. The removable and washable covers have zippers. Note: It is recommended to cover the set in case of rain, snow and frost.

  • Ratán color: gray
  • Cushion color: anthracite gray
  • Material: Powder coating steel, solid acacia wood, ratán pe
  • Cushion material: 100% polyester
  • High table dimensions: 185 x 80 x 110 cm (length x width x high)
  • Taburete dimensions: 40 x 44 x 108 cm (wide x high x high)
  • Cushion thickness: 4 cm
  • Removable and washable cushion covers
  • Seat width: 40 cm
  • Seat depth: 37 cm
  • Seat height from the floor: 76 cm
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x bar table
  • 6 x bar stool
  • 6 x seat cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.