Set Garden Furniture 3 pieces and brown synthetic rattan

$365.09
$365.09 $410.90
You save 11% ($45.81)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Create a relaxing rest area with this garden living room game. This outdoor living room set has a steel structure with dust coating and PE ratán cover, which makes it resistant and easy to clean. Thick padding cushions add additional comfort in their rest time. The covers of the zipper cushions are removable and washable. In addition, you can relax the legs in the rests, which can hide under the chair when they are not used. The support is also folding to keep the seats clean. Thanks to the light construction of Ratán Pe, you can move it easily. Important note: We recommend covering the game during rain, snow and frost to make it more durable.

  • Color: Brown
  • Cushion color: cream white
  • Material: Ratán PE, powder coating steel, cloth (100% polyester)
  • Fill material: foam
  • General dimensions of the armchair (when completely widespread): 63 x 130 x 102 cm (wide x high x)
  • Seat width: 52 cm
  • Seat depth: 48 cm
  • Seat height: 40 cm
  • Height of the headquarters from the seat: 25 cm
  • Backrest height from seat 62 cm
  • Table dimensions: 50 x 50 x 46 cm (wide x high x high)
  • Requires assembly: Yes
  • Delivery contains:
  • 2 x armchairs
  • 1 x center table
  • 4 x seat cushions
  • 2 x support cushions
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.