Skip to product information
  • Vetonek Set muebles de jardín 2 piezas y cojines ratán sintético marrón

Set Garden Furniture 2 pieces and brown synthetic rattan

$442.68
$442.68 $498.22
You save 11% ($55.54)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Undoubtedly, this set of garden ratan is an excellent contribution to the outdoor space of your house. It will give a touch of modern elegance to your patio, balcony or garden thanks to its stylish design at the same time. The set is made from Ratán Pe on strips, which is outdoors and water, and has storage function. It is easy to clean, resistant and adequate to use daily. The adjustable sofa allows you to find the most comfortable posture when sitting or lying down. Light construction facilitates to move the whole. This game is delivered with seat and support cushions, well padded and very comfortable. Our lounge set is easy to assemble.

  • Ratán color: brown
  • Cushion color: cream white
  • Material: Ratán Pe
  • Cushion material: 100% polyester
  • Seat and backup cushion thickness: 4 cm
  • Removable and washable cushion covers
  • Sofa dimensions: 109 x 85/100 x 52-80 cm (wide x high x high)
  • Seat height from the floor: 31 cm
  • Dimensions of the support: 100 x 80 x 29 cm (wide x high x high)
  • Pecusapiés cushion thickness: 7 cm
  • With storage function
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x sofa
  • 1 x rest
  • 4 x cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.