Skip to product information
  • Vetonek Set de 2 soportes de doble rueda de remolque de barco 59-84 cm

Set of 2 Double Bill T-towing supports 59-84 cm

$186.37
$186.37 $209.76
You save 11% ($23.39)
Tax included. Shipping calculated at checkout.

Description

These double wheel supports have a resistant steel frame and can be installed on the ship's trailer to support the lower part of the ship, which makes it an indispensable part of the ship's trailer. As the height of our double wheel bow support can be adjusted between 59 and 84 cm, it is suitable for both small and larger vessels. With a weight of 4.5 kg x 2 and a wheel size of 25.4 x 7.6 cm, the entire structure stably supports the vessel. Built with healing high quality and rubber steel, each solid bar arc support can support 250 kg, and in total they have a maximum load weight of 500 kg.

  • Material: steel structure and rubber wheels
  • Steel thickness: 1.8 mm
  • Weight: 4.5 kg x 2
  • Max. loading: 250 kg x 2
  • Height: 59 - 84 cm
  • Wheel size: 25.4 x 7.6 cm (diameter x wide)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.