Shelf 4 levels 2 UDS Silver Wood Steel Silver

$98.52
$98.52 $110.87
You save 11% ($12.35)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The storage shelves are excellent options for both domestic and commercial use, since it provides a lot of space to keep all your things well organized. Resistant material: The storage shelves consist of steel structures and plywood boards. Steel structures guarantee their solidity and stability while plywood offers strength, stability and moisture resistance. Great load capacity: thanks to the thick material and design without nails, the shelves have a higher load capacity. Flexible range : Each shelf can be divided into two small independent shelves. In addition, you can regulate the height of the shelves. Thus, the shelves provide a wide storage space for all the things you want to store and to maintain the space well organized and tidy at all times. Note: Each product comes with a mounting manual in the box to facilitate assembly. WARNING: To avoid overturning, this product should be used with the device provided to fix it to the wall (the delivery does not include the wall device).

  • Color: Silver
  • Material: Galvanized steel, plywood, plastic
  • Dimensions: 80 x 40 x 160 cm (length x width x high)
  • Plywood table thickness: 3.3 mm
  • Steel thickness: 0.55 mm
  • Total capacity: 320 kg (80 kg for shelf)
  • Galvanized anti -heal steel
  • Plastic covers for legs in order to protect the scratch floor
  • 4 height -adjustable shelves
  • They can be mounted without screws/bolts
  • They can be disassembled on two small independent shelves
  • The delivery contains:
  • 2 x shelves

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.