Skip to product information
  • Vetonek Silla de oficina giratoria de lino

Lino rotating office chair

$307.77
$307.77 $346.39
You save 11% ($38.62)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Work with maximum comfort with this baroque -style office chair! Natural and breathable material: linen, a natural textile derived from linen fibers, offers excellent breathability for furniture. It effectively absorbs moisture and helps to regulate the temperature, while its natural texture provides an elegant and cozy touch. Stable: the wood legs give the dining chair a natural and pleasant appearance while guaranteeing stability. Comfortable: This desk chair is padded with a foam, which adds a comfort plus when sitting. You can use the lever to adjust the height of the seat to your liking and comfort. Flexible stew with wheels: the 360 ​​degree rotating design and the wheels allow a wide range of movements. French vintage stake: the French armchair with a fabric of appearance of appearance of Natural linen adds a rustic glamor to your home.

  • Color: linen
  • Material: fabric (40 % viscose, 30 % polyester, 20 % linen, 10 % cotton), solid wood
  • Fill material: foam
  • Total dimensions: 57.5 x 57 x (92-99.5) cm (wide x high x high)
  • Seat width: 47 cm
  • Seat depth: 44 cm
  • Backrest height from the seat: 49 cm
  • Seat height from the floor: 46.5-54 cm
  • Height of armrest from the seat: 21.5 cm
  • 360 degrees of rotation
  • Maximum load capacity: 110 kg
  • Requires assembly: Yes
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.