Skip to product information
  • Vetonek Sillón de masaje con reposapiés tela gris oscuro

Massage armchair with dark gray fabric plating

$314.47
$314.47 $353.93
You save 11% ($39.46)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The massage armchair with a restraining stool gives a modern look to the decoration of your home and is perfect for the living room. The electric massage chair is made of fabric and foam stuffing, which makes it strong and soft to sit. Wooden legs offer additional stability for this armchair. This massage chair has a high -wing support and a deep cushion that provides great comfort. The massage armchair has 4 back and seat massage points, and the restraint has 2 leg massage points. The including remote control allows you to choose different massage programs. The TV massage chair is also equipped with a side pocket for remote control. The restraint is stuffed with pp cotton, and its upper part is removable. Note: The product has a USB connector, but the Certified 5V USB supply source is not included.

  • Color: dark gray
  • Material: fabric (100% polyester), plywood, plastic
  • Fill material: foam, cotton pp
  • Chair dimensions: 68 x 78 x 94 cm (wide x high x high)
  • Interior size: 47 x 49 cm (deep x width)
  • Backrest height from the seat: 59 cm
  • Dimensions of the support: 40 x 40 x 39 cm (wide x high x high)
  • Includes a USB and remote control
  • With side pocket
  • Voltage: DC 5 V
  • Maximum load capacity: 110 kg
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x armchair
  • 1 x rest
Take into account the risk of open fire and other sources of intense heat in the vicinity of the product. Maximum 110 kg per seat. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.