Skip to product information
  • Vetonek Sofá cama sin colchón tela gris claro 80x200 cm

Sofa bed without mattress Claro gray fabric 80x200 cm

$273.81
$273.81 $308.17
You save 11% ($34.36)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This sofa bed 2 in 1, which serves both sofa and bed, is a practical and striking complement to the living room or bedroom. Versatile bed sofa: The sofa bed can be used as a sofa during the day or as a bed at night, to have a quick solution to accommodate guests spending the night. Comfortable Experience: The sofa bed is made of cloth. The fabric has a simple and clean appearance, in addition to being breathable and lasting. Likewise, the backrest and plates of the guest bed are padded with foam to improve comfort. Robust and stable structure: the main structure of the sofa bed is made of metal and solid wood, so it is very resistant and lasting. These plywood slats allow a better air circulation in order to keep the fresh mattress for a longer time, in addition to improving weight capacity and guaranteeing stability. Modern design: The sofa bed has a modern design with sharp lines, A minimalist aspect, as well as natural light, and add a modern style to the house! Useful information: The mattress is not included with the bed. We have a varied selection of mattresses. You can take a look at our store to look for the corresponding mattress.

  • Color: light gray
  • Material: fabric (100 % polyester), metal, solid wood
  • SELLONE MATERIAL: plywood
  • Fill material: foam
  • Total dimensions: 223 x 90 x 66.5 cm (wide x high x high)
  • Seat width: 200 cm
  • Seat depth: 80 cm
  • Seat height from the floor: 26.5 cm
  • Height of the headquarters from the ground: 58 cm
  • Leg height: 5 cm
  • Adequate mattress dimensions: 80 x 200 cm (width x long) (mattress not included)
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.