Skip to product information
  • Vetonek Sofá cama sin colchón madera maciza de pino blanco 90x200 cm

Sofa bed without white solid wood of white pine 90x200 cm

$168.78
$168.78 $189.96
You save 11% ($21.18)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This classic wooden bed sofa, with a simple and timeless design, is intended to be a practical and decorative contribution to the house. Solid pine wood: solid pine wood is a beautiful natural material. Pine wood has straight veins, and knots give the material their distinctive rustic appearance. This bed for guests is made of solid pine wood, so it is stable and lasting. SELET DESIGN: The ribbon somier allows the air to circulate to keep the fresh mattress for a longer time, in addition to improving the load capacity of the bed and of ensuring its stability. Comfortable support: The wooden headboard provides you with sufficient support to sit on the sofa bed to read or watch movies. It is a quick solution to house guests at night. ADDITIONAL STORAGE SPACE: Take the most of the space under the bed to store several objects. Ideal to store boxes to organize your clothes, toys or quotes. Note: delivery includes only a sofa bed structure. The mattress is not included. You can take a look at our store to look for the corresponding mattress. Each product comes with a mounting manual in the box to facilitate assembly.

  • Color: White
  • Material: solid pine wood
  • Total dimensions of the sofa bed: 205.5 x 96 x 100 cm (length x width x high)
  • Adequate mattress size: 90 x 200 cm (width x long) (mattress not included)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.