Skip to product information
  • Vetonek Sofá cama extraíble madera maciza de pino blanco 2x(90x200) cm

Sofá cama extraíble madera maciza de pino blanco 2x(90x200) cm

$268.91
$268.91 $302.66
You save 11% ($33.75)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este diván multifuncional de madera se puede utilizar como sofá durante el día o como cama por la noche para ofrecer una solución rápida para alojar huéspedes durante la noche. ¡Este práctico sofá cama definitivamente llama la atención donde se coloque! El sofá cama está hecho de madera maciza de pino, lo que lo hace robusto y estable. Con una cama plegable, el mueble se puede convertir fácilmente en un sofá durante el día y en una cómoda cama por la noche. Esta estructura de sofá cama maximiza el espacio disponible en el piso al tiempo que proporciona espacio para dormir para dos personas, lo que lo convierte en una opción ideal para personas con espacio de vida limitado. Además, la cama extraíble está equipada con una tabla lateral que evitará que el usuario se desplome mientras duerme. Ten en cuenta que la entrega incluye solo una estructura de sofá cama. El colchón no está incluido. Puedes consultar nuestra tienda para ver los colchones a juego.

  • Color: Blanco
  • Material: Madera de pino maciza
  • Dimensiones totales (extendido): 203 x 183 x 70 cm (largo x ancho x alto)
  • Dimensiones totales (no extendido): 203 x 98 x 70 cm (largo x ancho x alto)
  • Puede servir como cama de invitados y sofá
  • Tamaño adecuado del colchón: 90 x 200 cm (ancho x largo) (colchón no incluido)
  • Se necesitan 2 colchones
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.