Skip to product information
  • Vetonek Panel de suelo para ducha solar escalera piscina WPC

Solar shower panel staircase WPC pool

$102.50
$102.50 $115.37
You save 11% ($12.87)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our multifunctional WPC board can be used as a solid soil for your solar shower, but it can also be used to stabilize the pool staircase or as a non -slip carpet. The soil plate is made of robust and durable compound plastic of water resistant wood (WPC). Both the surface and the lower part are non -slip. You can connect the solar shower to this non -slip floor plate, so you will not have to drill fixing holes in your tiles. In addition, the Robust WPC panel can also be used to provide an non -slip base for the pool staircase. With its discreet color and non -slip design, our WPC plaque is also ideal for use as a folpudo. Note: The article needs assembly. The shower, ladder and pool are not included.

  • Gray
  • Material: compound of wood and plastic (WPC)
  • Dimensions: 101 x 63 x 5.5 cm (length x width x thickness)
  • Surface and lower non -slip
  • Multifunctional:
  • Massive soil element for your solar shower
  • Increase the stability of the pool staircase
  • It can also be used as felpudo
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. CAUTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.