Skip to product information
  • Vetonek Soldador sin gas de alma fundente MIG 120A
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL
  • Soldador sin gas de alma fundente MIG 120A vidaXL

Soul -Founding Gas Funder 120A

$228.52
$228.52 $257.19
You save 11% ($28.67)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This welder is a perfect option for DIY lovers and professional welders for any maintenance and repair work. Syrgic function: Synergic function helps adjust the welding parameters automatically, such as cable tension, to facilitate the welding process and obtain an optimal welding quality. Inverter technology: thanks to inverter technology, it is Lighter and easier to carry than the rest of the fastest transformer welders. Cod design: It is very practical that to use this machine the gas tank is not needed. Safetyplus: This welding machine has an integrated fan and a light LED on the panel to avoid safety problems caused by overheating. Shakes Uses: The welding machine is suitable for welding metal, alloy steel and sweet steel of 0.7 ~ 6 mm thick. It is designed for different purposes, such as DIY, Maintenance and Repairs. Useful information: To facilitate assembly, each product is delivered with a manual.

  • Color: black
  • Material: steel, plastic
  • Dimensions: 13.5 x 32.5 x 24 cm (length x width x high)
  • Input voltage: 230 V
  • Frequency: 50 Hz
  • Degree of Housing Protection: IP21S
  • Power supply: plug
  • Power cable length: 2 m
  • With synergistic function
  • Wire diameter: 0.9 mm
  • Power consumption in an inactive state: 6 W
  • Suitable for welding metals, alloy steel and sweet steel of 0.7 ~ 6 mm thick
  • Suitable for welding with a founding soul (no gas)
  • Weight: 5.6 kg
  • Output current: 50 ~ 120 A
  • Output voltage: 16.5 ~ 20.0 V CC
  • Power source effectiveness: 80%
  • Work cycle:
  • 120 to 20 V - 20%
  • 70 to 17.5 V - 60%
  • 55 to 16.75 V - 100%
  • Delivery includes:
  • 1 x welding machine
  • 1 x wire brush combined with hammer
  • 3 x nozzles (0.9 mm)
  • 1 x mig torch with cable (2 m)
  • 1 x cable ground clamp (1.3 m)
  • 1 x welding wire (0.9 mm)
Do not allow children to play with the device. It is not a toy. Only users with technical skills should use the tool. Use personal protective equipment before using this product. Keep children and people away away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.