Skip to product information
  • Vetonek Librería apilable madera contrachapada gris cemento 30x30x80 cm

Stackable library plywood gray cement 30x30x80 cm

$46.82
$46.82 $52.70
You save 11% ($5.88)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Improve your space with this versatile and customizable shelf, a wonderful solution for your storage needs. Stable and durable material: engineering wood is a durable and stable material with a smooth surface that is resistant to moisture, deformation and breakage, which makes it a reliable option for a variety of projects. Scable design: the Shelf works very well by itself, but you can also stack with additional units to maximize vertical storage space. Whether it is starting with one or plans to expand, this cabinet facilitates the adaptation to the growing storage needs. Their daily uses are perfectly organized and easily accessible. You can place the bookshelf anywhere, in your closet, living room, kitchen or bathroom. With a several level shelves design, you can save articles and accessories for daily use in the compartments or exhibit your collections. Facil of maintaining: thanks to its smooth surface, the shelves are easy to clean with a wet cloth and require less maintenance. WARNING: To prevent it from turning, this product should be used with the setting device to the wall supplied.

  • Color: concrete gray
  • Material: Engineering Wood
  • Dimensions: 30 x 30 x 80 cm (wide x high x high)
  • Total weight capacity: 60 kg
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.