Skip to product information
  • Vetonek Mesas apilables 3 unidades mesa maciza reciclada

Stackable tables 3 units Recycled Massive Table

$135.56
$135.56 $152.57
You save 11% ($17.01)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These exclusive and elegant applied tables, in three different sizes, will definitely be a great contribution to your living room, study, corridor, etc. Auxiliary tables are handmade with solid solid wood, a combination of recycled woods that include teak, mango wood, pine, beech, etc. These woods are recycled from old buildings such as factories, sheds and ships. This makes it a fantastic ecological option in the manufacture of furniture. As each piece is handmade, the colors vary and reveal many blue, green, creams and sometimes orange, red and pink tones. This even means that each one is unique! In addition, these nest tables can be stored under the other to save space. Keep in mind that wood is a natural product and can present slight imperfections. The colors and veins vary from one piece to another, which makes each piece unique. The delivery is also random.

  • Material: Recycled solid wood with mixed color finish, iron with powder coating
  • Dimensions (L): 60 x 45 cm (high diameter x)
  • Dimensions (m): 50 x 40 cm (high x diameter)
  • Dimensions (s): 40 x 34 cm (high diameter x)
  • Requires assembly: Yes
  • Delivery contains:
  • 3 x tables

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.