Skip to product information
  • Step2 Banco de trabajo de juguete Handy Helper's Workbench

Step2 Toy Work Bank Handy Helper's Workbench

$91.83
$91.83 $103.35
You save 11% ($11.52)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Step2 Helper's toy work bank is an excellent toy workshop set for the little passionate about real tools. It has four work pieces made of realistic foam wood that encourage the curiosity of the little ones. The toy work bank stimulates the development of fine motor skills when playing with the portabrocas, the electric drill and the toy bank screw. In addition, keep your imagination occupied for hours! The professional workshop of Handy Helper's toy has a storage cube to easily collect accessories and a plug board with hooks to hang the tools in an orderly manner. It works with two AA batteries (not included). The delivery comes with a game of more than 22 accessories.

  • Color: Multicolor
  • Material: Rotational molding plastic
  • Dimensions: 67.3 x 26.7 x 89.5 cm (length x width x high)
  • Toy tool bank with integrated toy bolts, toy portable and a realist bank screw
  • Electric Toy Drill
  • Pillar board with hanging hooks
  • Cube and storage area
  • 4 pieces of work with realistic construction wood
  • Required batteries: 2 x AA batteries (not included)
  • Delivery includes: Game of 22 accessories
  • WARNING: Not suitable for children under 36 months.
  • Warning: only for domestic use.
  • WARNING: It must be used under the direct supervision of an adult.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.