Skip to product information
  • Vetonek Tabla de surf diseño mosaico 170 cm

Surf table Mosaic design 170 cm

$157.54
$157.54 $177.31
You save 11% ($19.77)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The surf table is versatile and light, so it is ideal for beginners who seek to take their first waves. Rigid material: The main body of the surf table is made of soft XPE, which allows a great impact absorption and has a high density that provides good float for beginners. The light EPS foam nucleus adds to the stiffness and resistance of the entire surf table. Soft dislike: the slippery background guarantees that you gently slide yourself on the water. Propulsion fins: a game of three propulsion fins made of plastic Resistant gives the cyclist a wide control over the wave. Safe ankle closure: a high quality ankle strap is included to connect to the table and do not lose it after a wipeout.

  • Color: multicolored (mosaic design)
  • Material: XPE Cover + PP background + EPS foam nucleus
  • Dimensions: 170 x 46.8 x 8 cm (length x width x thickness)
  • Maximum load capacity: approximately 90 kg
  • XPE cover thickness: 3 mm
  • With traction pad
  • Great initiation table for adults and children
  • Includes 1 strap and 3 removable plastic fins

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.