Skip to product information
  • Vetonek Tablas de tracción 2 unidades nailon azul 107x31x7 cm

Traction tables 2 units Nylon Blue 107x31x7 cm

$115.47
$115.47 $129.96
You save 11% ($14.49)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These traction boards have excellent performance in vehicle recovery and give you a trip without restrictions. Durable material: The recovery plate is made of reinforced nylon, so it is lasting. It can even support the weight of up to 10 tons. Therefore, it is suitable for most vehicles. Optimized teeth design: molded teeth, well positioned to grab the tires and prevent the vehicle from sliding backwards, will not move in front of the sudden turn of the wheels. The traction table is easy to place under the wheels of the vehicle and helps you rescue it. Cat base function: the rescue table is designed with a built -in cat base that is compatible with most farm cats. In addition, it is intended to help rescue the vehicle in less ideal lands. Fácil Transport: The off -road traction table has a handle and is easy to transport. Get it in the trunk or on the roof of the vehicle and travel with it anywhere.

  • Color: blue
  • Material: reinforced nylon
  • Dimensions: 107 x 31 x 7 cm (length x width x high)
  • Maximum load capacity: 10 tons
  • Includes screw material
  • Delivery includes:
  • 2 x traction tables

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.