Skip to product information
  • Vetonek Techo de cama infantil madera maciza pino blanco 199x95,5x88 cm

Techo de cama infantil madera maciza pino blanco 199x95,5x88 cm

$53.72
$53.72 $53.72
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Convierte la cama de tu hijo en un patio de recreo interior con este techo de cama para niños que hará que la hora de acostarse sea animada y divertida. Estructura estable y duradera: La madera de pino maciza es conocida por su resistencia y durabilidad. Sus vetas rectas y sus característicos nudos contribuyen a su encanto rústico.Gran diversión: Al combinar el techo con la cama de tu hijo, puedes crear un escondite que le ofrezca a tu hijo mucha diversión a la hora de acostarse. Este innovador añadido a no solo será un punto emocionante, sino que también traerá asombro y emoción a la habitación de los niños.Puerta lateral abierta: El techo cuenta con una puerta lateral abierta, lo que facilita el acceso para que tus hijos entren y salgan de la cama. Información útil:La entrega incluye un techo solamente; la cama no está incluida.

  • Color: Blanco
  • Material: Madera maciza de pino
  • Dimensiones: 199 x 95,5 x 88 cm (largo x ancho x alto)
  • Edad adecuada del niño: Menor de 6 años
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.