Skip to product information
  • Vetonek Trampa para animales hierro galvanizado 64,5x25x26,5 cm

Galvanized iron trap 64.5x25x26.5 cm

$39.12
$39.12 $44.03
You save 11% ($4.91)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This animal trap is perfect to get rid of unwanted visitors without damaging them. Resistant material: The trap to capture live animals is made of resistant iron wire mesh. Iron is a strong and hard material, one of the favorite solid metals in industrial and furniture construction. In addition, galvanization provides greater protection against corrosion and is useful for products that are going to be used outdoors and in difficult environments. Segura and humanitarian: the unique door allows animals to enter the trap completely before closing for guarantee better capture results. Little mesh holes are designed to prevent animals from escaping. The smooth internal edges of the rats trap cage prevent animals from hurting. Practical design: With manageable dimensions, a single person can easily manipulate this humanitarian trap for mice. In addition, transport handle helps you avoid contact with the animal during transport. Many uses: This humanitarian trap for rats is ideal for mice, squirrels, striped squirrels, topillos, shrews, mofots, rabbits, comadrees and size animals similar.

  • Color: Silver
  • Material: Galvanized iron
  • Dimensions: 64.5 x 25 x 26.5 cm (wide x high x high)
  • Mesh hole dimensions: 2.5 x 2.5 cm (long x width)
  • Handle
  • Requires assembly: Yes
The use of a trap may require an exemption, a permit or a license. Family with all local, state and national laws related to the use of this product. Follow these laws. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.