Skip to product information
  • Vetonek Tumbona cama jardín con techo ratán sintético gris

Loom garden bed with gray synthetic roof

$653.39
$653.39 $735.38
You save 11% ($81.99)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This lorage is an ideal hiding place to relax and enjoy your free time near the pool, in the garden, the patio, etc. You can demonstrate your good taste for the setting and your modern lifestyle with this elegant loup. The loup bed is made of Ratán Pe, which is water resistant, UV rays, easy to clean and ecological. The table can be lifted according to what you need. Thanks to the steel structure with powder coating, it is stable and lasting. The thick cushions and pillows are soft, so this lob is quite comfortable. The covers, removable and washable, are equipped with zippers. The roof protects you from the sun while you read or relax on summer days. Our sunbed is easy to mount. Note: We recommend covering the sunbed in case of bad weather such as rain, snow or frost.

  • Color: mixed gray
  • Cushion, pillow and roof color: dark gray
  • Material: Ratán pe, fabric (100% polyester), steel
  • Loom dimensions: 200 x 60 x 124 cm (length x width x high)
  • Table dimensions (closed): 56 x 56 x 23 cm (length x width x high)
  • Table dimensions (when lifted): 56 x 56 x 44.5 cm (length x width x high)
  • Dimensions of the support: 67 x 56 x 23 cm (length x width x high)
  • Height of the headquarters from the ground: 58 cm
  • Seat height from the ground: 23 cm
  • Seat depth: 58 cm
  • Seat width: 196 cm
  • Cushion thickness: 5 cm
  • Outdoors
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x Loom with a roof garden
  • 1 x folding table
  • 2 x stools
  • 4 x cushions
  • 4 x pillows

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.