Skip to product information
  • Vetonek Tumbonas con mesita 2 unidades ratán sintético textilene negro

Sun loungers 2 units synthetic textilene black

$384.98
$384.98 $433.28
You save 11% ($48.30)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Synthetic Ratán Steering Set will be ideal for sunbathing and relax by the pool, in its patio or in the garden. The locks are made of water -resistant synthetic rattan, which makes them easy to clean and gives them an elegant appearance. Textilene tissue is comfortable, wear resistant and simple maintenance. The sun loungers offer extra comfort thanks to their curved design, the adjustable support and its soft headrest. These locks and the auxiliary table have a robust steel structure that adds stability and durability. On the solid table, you can place drinks, the phone, a book or other small objects to have them by hand. Delivery includes 2 sun lollipops and 1 auxiliary table. It is an easy set to mount. Note: We recommend covering them if it rains, snows or ice.

  • Color: Black and White
  • Loose material: synthetic rattan + textilen tissue + steel
  • Table material: tempered glass surface + steel structure with powder coating
  • Loom dimensions: 213 x 70 x (40-91.5) cm (length x width x height)
  • Table dimensions: 40 x 40 x 40 cm (length x width x high)
  • The back of the sunbed is adjustable in 4 positions
  • Delivery includes 2 sun lumbers and 1 auxiliary table

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.