Skip to product information
  • Ubbink Filtro de estanque Filtramax 12500 PlusSet 1355071

UBBINK FILTRAMAX PANA FILTER 12500 PLUSSET 1355071

$422.93
$422.93 $476.01
You save 11% ($53.08)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Filtramax 12500 Ubbink Plusset is a closed filtration system with modules for biological and mechanical cleaning. The pond filter set with UV-C pond clarifier and filter pump is designed for ponds with a maximum volume of 6500 l/12500 L (pond with fish/pond without fish). The decisive advantage of this system in parallel is that it can be extended by one or even several filtramax modules in case of larger ponds. Each module can filter the respective amount of water separately and return the clean water to the pond. With the parallel system, a large amount of water is distributed in two, three or more filters, so that the water is cleaned efficiently in a short time. The 2 cameras filter system guarantees a complete filtering and the formation of nitrifying bacteria in an optimal life environment!

  • Material: Plastic
  • Dimensions: 58 x 59 x 38 cm (wide x high x high)
  • Ubbink Filtramax 12500
  • Suitable for ponds without fish 12500 L
  • Suitable for ponds with 6500 l fish
  • UBBINK ALGCLEAR UV-C 10000
  • Power: 11 w
  • Ubbink PowerMax 5000 Fi
  • Food: 230 V ~ / 50 Hz
  • Power cable length: 10 m
  • Flow: 5000 l/h
  • Power: 30 w
  • Maximum height: 3.6 m
  • Delivery includes:
  • 1 x ubbink filtramax
  • 1 x ubbink algclear
  • 1 x Ubbink PowerMax bomb
  • Assembly material:
  • 1 x zeolith with mesh: 1.8 kg
  • 1 x bio cores
  • 1 x 6 kg filter substrate
  • 2 x sponge filters 35 mm, 1 x thick black, 1 x fine blue
  • 2 X BOLL VALVE 1 ", Nut and washer
  • 1 x waste connection 1 ½ "x 50/40 mm, nut and washer
  • 1 x hose pond for filter residues: 1 m x 40 mm
  • 1 x hose pond for filter supply: 3 m x 32 mm
  • 1 x connector in t 1 "internal, 40 x 40 x 40 mm + plug
  • 3 x Hose clip: 2 x 30-34 mm-1 x 38-42 mm
  • Screws

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.