Ubbink LED Pool Focus 350 White
Description
Ubbink's LED 350 focus will undoubtedly add a perfect environmental touch for swimming pools. This LED lamp for cold white light pool will make your pool become an impressive attraction at night. As the lights are equipped with high brightness and low consumption LEDs, in addition to being super bright they will have a long useful life. Also, all pool lighting is perfectly suitable for swimming pools with a wooden frame that does not exceed 45 mm thick.
- Form: Round
- Dimensions: 275 x 75 mm (diameter x height)
- Network voltage: 230 V ~ / 50 Hz
- Power: 24 w
- Material: ABS housing and glass with PMMA protection
- Cable length: 5 m
- Type of Light: LED 350 Cold White
- Protection class: III
- Protection level: IP 68
- Suitable for swimming pools with a wooden frame and wall thickness that does not exceed 45 mm
- Install the pool lighting on water surfaces of 25 -35 ㎡ or water volumes of 30 to 40 m³.
- Accessories included:
- 1 x transformer 230V ~ / 12V ~, IPX4, TDC-DE-36-12 W with 2 m + plug power cable
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.