Skip to product information
  • Ubbink Material filtro de estanque natural ZeoLith 10-20mm 8,5kg/10l

Ubbink Material Zeolith natural pond filter 10-20mm 8.5kg/10l

$54.26
$54.26 $61.07
You save 11% ($6.81)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Keep the water from your clean and clear pond with this natural filter material for 10 -liter Zeolith ponds of Ubbink. These natural grains act as effective filtration agents, promoting a healthy and balanced ecosystem. Efficient ammonium and heavy metal binding: Zeolite is a natural filter material for pump bombs based on porous minerals composed mainly of silica and aluminum that absorb heavy and ammonia metals. useful with 10 l packaging. They act as purifiers of nature, helping to eliminate pollutants and contributing to the general well -being of the inhabitants of the pond. Useful information: Zeolith pond grains must be placed on a network within the pond filter unit between mechanical function foam filters and biological function filter materials.

  • Color: White
  • Content: Zeolite
  • Natural filter material for ponds
  • Zeolite granulometry: 10-20 mm
  • Absorb heavy and ammonia metals
  • Prevents algae growth
  • Quantity: 8.5 kg (10 l)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.