Skip to product information
  • Ubbink Cascada Niágara 60 cm de acero inoxidable

Ubbink Niagara Cascada 60 cm stainless steel

$237.71
$237.71 $267.54
You save 11% ($29.83)
Tax included. Shipping calculated at checkout.

Description

This Ubbink Niagara waterfall, with a width of 60 cm, can be easily mounted on a wall. Made of stainless steel 304, this garden waterfall is very durable, for years of use. Get this Ubbink garden waterfall and create a relaxing decorative element with water in your own patio. To create a beautiful waterfall, it is important that you choose a bomb with the proper capacity. For Niagara 60 of Ubbink depending on the height difference between water and waterfall, you need a pump with the following capacity: Difference of height 50 - 100 cm: Recommended pump capacity 2000-4000 l/Hdifference of height 150 cm: RECOMMENDED PUMP CAPACITY 10000-12000 L/HDIFERENCE OF HEIGH

  • Material: stainless steel
  • Dimensions: 60 x 10 x 12.5 cm (length x width x depth)
  • With 1 female thread and 25 mm hose connection
  • The waterfall is not designed to function in water containing chlorine and salt
  • Assembly material included
  • Recommended bomb:
  • For cascades of 30-40 cm high: Sku 401406 Ubbink source pump "Xtra 3900"
  • For cascade height of 50-60 cm: SKU 403744 Ubbink source pump and pond "ELIMAX 6000"

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.