Metal Mesh Valla with 2x25 m anthracite skewer

$381.82
$381.82 $429.73
You save 11% ($47.91)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This versatile near wire with anchor skewers is ideal for creating a safe and lasting barrier around your property. It can also be used to build an animal enclosure. Durable material: steel is a very hard and strong material. It offers solidity and stability. Galvanization provides better corrosion protection and is useful for products that will be used outdoors and in hostile environments. PVC ”: the fence of the garden carries a PVC coating on the surface, so it is resistant to the rays UV, oxide and wear. Entrepreneurized design: the interlaced design makes it close to garden not only is flexible, but also very durable and difficult to break. You can cut it to the size you want.

  • Color: Anthracite gray
  • Material: Galvanized steel with PVC coating
  • Near wire:
  • Fence dimensions: 2 x 25 m (high x length)
  • Mesh dimensions: 100 x 75 mm (length x wide)
  • Main wire diameter: 1.55/1.95 mm (1.55 mm steel wire; 1.95 mm including PVC covering)
  • Valla accessories:
  • Straight post dimensions (no skewer): 32 mm x 2.13 m (high diameter)
  • Puntal dimensions (without skewer): 32 mm x 2.09 m (high diameter)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x Roll close to wire
  • 11 x straight posts with caperuza and cable supports
  • 2 x props
  • 2 x diagonal struts
  • 11 x straight post skewers
  • 2 x skewers for struts
  • 1 x torque
  • 1 x nail set m

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.