Skip to product information
  • Vetonek Valla metálica con estacas postes acero galvanizado 1,0x25 m

Metallic fence with galvanized steel stakes 1.0x25 m

$396.43
$396.43 $446.18
You save 11% ($49.75)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This metal fabric fence is complete with accessories for nearby that include posts, tensor wire, wire to tie, wire tensioners and spike anchors for easy installation. It is widely used to fence gardens, parks, zoos, sports courtyards, roads and swimming pools for greater privacy and/or safety. This metal fabric fence is made of high quality steel wire with PVC coating for greater resistance and durability. You do not have to worry about oxidation or weakening of this close. All necessary assembly accessories are included in the package, providing a coordinated process service! The delivery includes near metal fabric, 11 posts for close, 11 spike anchors for close posts, 2 fixing posts, 2 spike anchors for fixing posts, 1 fastening wire, 1 wire to tie and 3 wire tensioners . Tip: If you need about 50 meters long, you can buy 2 units of this game and 100 meters, 4 units, etc., depending on the length you need. The assembly is simple and easy.

  • Information about the metal fabric:
  • Color: moss green
  • Material: PVC coating steel wire
  • Fence size: 1.0 x 25 m (high x length)
  • Mesh dimensions: 60 x 60 mm
  • Wire thickness: 2.8 mm
  • Valla accessories information:
  • Valla post size: 34 mm x 1.2 m (high diameter)
  • Reinforcement post size: 34 mm x 1.5 m (high diameter)
  • Extension cable size: 3.5 mm x 80 m (diameter. X length)
  • Wire size to tie: 2.0 mm x 25 m (Diam. X length)
  • Wire tensioner: 100 mm
  • Post/Anchor Post Support Height: 0.5 m
  • The set includes:
  • 1 x link valla
  • 11 x posts for fence with lid and support for wires
  • 11 x Stamp anchors for fence posts
  • 2 x reinforcement posts with clip
  • 2 x Piqueta anchors with reinforcement post support
  • 1 x transverse
  • 1 x wire to tie
  • 3 x wire tensioners

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.