Valla set 3 square + 1 oblique WPC Gray 619x186 cm

$1,205.22
$1,205.22 $1,356.46
You save 11% ($151.24)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our set of panels for fences can be used as a garden or residential fence barrier for greater privacy and safety. This WPC fence has an impression of wooden veins on one side and a normal impression on the other side, so you can choose the design that you like best. Our panel composed of wood and plastic does not require any additional treatment such as lubrication or paint. It is very lasting and resistant to rot or oxide. Thanks to the upper aluminum profile, fence tables can be linked firmly to each other, which increases its stiffness and impact resistance. Designed with the modular system, close boards are easy to install and allow you to expand freely. These posts have three slots, which allow to mount the fence in various ways, for example, in a straight line (180 degrees), at right angles (90 degrees) or "T" shape. The delivery includes 36 WPC boards, 5 posts and 4 aluminum bars. The fence set is easy to mount.

  • Gray
  • Material: composed of wood and plastic + posts and aluminum final bar
  • Total dimensions: 619 x 186 cm (high x width)
  • Square Panel:
  • Table dimensions (each): 170 x 20.3 cm (length x wide)
  • Final bar length: 170 cm
  • Post dimensions: 7 x 7 x 185 cm (length x width x high)
  • Inclined Panel:
  • Dimensions Board: (24 - 90) x 20.3 cm (length x width)
  • Post height: 105 cm
  • Requires assembly: Yes
  • Delivery includes:
  • 36 x fence boards
  • 5 x poles with steel base
  • 4 x final aluminum bars

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.