Skip to product information
  • Vetonek Panel calefactor blanco 542 mm x 900 mm

White heating panel 542 mm x 900 mm

$182.04
$182.04 $204.89
You save 11% ($22.85)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This design heating panel will heat any room with an excellent appearance. The clean panel line is comfortably adapts to almost any modern style furniture. Made of quality steel and finish with powder coating, this heating panel will serve you for years of use. This heating panel is easy to install with all wall supports, caps and screws included. It can be installed vertically, so it is an excellent option for home installation.

  • General dimensions: 542 x 900 mm
  • Distance between the wall and the front of the radiator: 97 mm
  • Departure: 620 watts
  • Number of columns: 7 (15 mm thick)
  • Color and type: White, a single radiator
  • Tube: Flat bar design
  • Material: Low carbon steel construction
  • Fixing package included: It is supplied with wall supports, tapas and ventilation plugs
  • Suitable for any central heating system
  • Operating temperature: 110 ℃
  • Max operating pressure: 5 bar
  • Connection: lower center of 1/2 inch
  • TAKE INTO ACCOUNT: Radiator valves are not included
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. CAUTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.