Skip to product information
  • wolfcraft Soporte móvil Tecmobil para taladro 4522000

Wolfcraft Mobile Tecmobil Support for Drill 4522000

$80.13
$80.13 $90.18
You save 11% ($10.05)
Tax included. Shipping calculated at checkout.

Description

This Tecmobil mobile support for Wolfcraft drill is the ideal accessory for your drill, to precisely drill at any angle in any situation: on the wall, at the top, on an inclined surface, in round pieces, tables and sections with shapes . This support is suitable for all 43 mm electric drills. Thanks to the powder extraction connector, it allows precise and no dust drilling in each position. The drilling support has double guide bars that can be tilted with a scale for a precise drilling of +/- 45 °. It is equipped with additional handle for precise placement and against the sliding when drilling. The integrated V slot is designed for safe fixing of round pieces.

  • Dimensions: 295 x 150 x 265 mm (length x width x height)
  • Euronorm necklace diameter: 43 mm
  • With connector for dust extraction: dust free and precise drilling in each position
  • Double guide bars with scale for a precise drill +/- 45 °
  • Infinitely adjustable depth bumper
  • Straight guide to drill a series of holes in a line
  • Additional handle for precise placement and against the sliding when drilling
  • It can become a fixed support thanks to the four holes on the motherboard
  • Integrated V slot for a safe fixation of round pieces
  • Base plate with focused mechanism that allows centered drilling.
  • No more batch search thanks to the chest compartment inside the handle
Security notes • Observe in any case the safety standards of the manufacturer of its motor machines (eg electric drill, angular grinder, etc.). • These devices must comply with VDE standards. The devices manufactured after 1995 must have the CE symbol. • Disconnect the energy: - Before changing accessories - before changing work parts - before maintenance work - as long as it is not in use • Before starting working, check the operation of devices and tools. Never work with damaged or disregarded tools. • Check that the assembly of the devices used is correct (for example, screwed unions) before starting working. • Make sure the workpiece is tight and safe. • The space between the work table and the support dish should not exceed 3 mm. • Make sure there is always a stable support for the workpiece or firmly hold the component to mechanize. • Make sure you and the devices used always in a safe position. • Respect the indicated data on minimum speeds and direction of rotation in the product, packaging or in the operating instructions of the devices and tools to be used. • Use the tools only for the real expected purpose. • Never remove existing protection devices. • Use glasses or respiratory protection for mouth/nose during all works that generate dust, splinters, fumes or sparks. • Protect your ear when you do jobs that cause a lot of noise. • Use safety glasses, strong protective gloves and a mouth and nose protector in all the work in which dust, chips, fumes or sparks occur. • Never introduce your hand in the equipment that is in operation. • Take care that all electrical equipment is protected against moisture, dust and humidity. • Keep children away from your workshop and save their equipment and tools in a safe place. • Never allow without experience to work with your equipment and tools without instructions or supervision. • Always work well planned and concentrated. • Keep your work area ordered. • Use only original Wolfcraft ® spare parts

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.