Skip to product information
  • Vetonek Tocador con LED madera contrachapada roble humo 90x50x132,5 cm

WOOD LED DRESS HUMO 90x50X132.5 cm

$136.33
$136.33 $153.43
You save 11% ($17.10)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With straight and elegant lines and an asymmetric shape full of originality, this dressing table will attract all eyes, no doubt! Durable material: the plywood has an exceptional quality, with a smooth surface and also has strength, stability and moisture resistance. LED luces: The touched table has LED bulbs with USB, which can be easily changed whitely white to Cold White. The integrated LED bulbs around the mirror illuminate your beauty. Issuer of the dressing table: the t -table with a mirror is perfect for your daily beauty routine. The mirror allows you to take care of the skin and make up! Ample storage space: the dressing table offers ample space to easily access makeup, jewels and basics for day to day. Useful information: To facilitate the assembly, each product is delivered with a manual. The product has a USB connector, but the USB USB supply source is not included. WARNING: To prevent it from turning, this product should be used with the setting device to the wall included.

  • Color: smoked oak
  • Material: plywood, acrylic
  • Dimensions: 90 x 50 x 132.5 cm (wide x high x)
  • Legal Documents:

    You can find more details on how to prevent furniture from turning here

Do not use this article if any component is broken, torn or foul. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.